Share to:
The holding solenoid make the plunger stay at the end position after power is off with the magnetic force of permanent magnet. There are two types of holding solenoids: one-way and two-way self-holding, once power-on, the plunger moves to side of iron core, otherwise, it moves to another side, it is used in electronic locks and charging guns.
Customise Linear Dual keep Solenoid NCE-K0727L/S Specification
Solenoid parameter:
NCE-K0727 Dual keep solenoids drawing:
Customise Linear Dual keep Solenoid NCE-K0727L/S Specification
| Products Name: | frame keeping Solenoid NCE-K0727L/S |
| Mode No.: | NCE-K07277L/S |
| Type: | Linear Solenoid(Push pull keeping Solenoid) |
| Total Weight: | About42g |
| Plunger Weight: | About 12g |
| Size: | 27*17*14mm |
| Application: | EV car charger, Lock etc. |
| Work Mode: | Push & Pull |
| Install Mode: | Screw |
| Connection Mode: | Terminal |
| Rated Voltage (V): | 6-48V DC |
| Power(20℃): | 4-40W |
| Max On Time (s) | 1 - Continuous Electricity |
| Stroke: | 0-12mm |
| Force: | 0-1800gf |
Size: 27.5*17.5*14mm
plunger：φ7mm
Voltage: DC12V
Stroke: 0-5mm
Force: 2-4N
Holding Force: 5-7N
Power : 24W
Current: 2A
Resistance: 6Ω
Life: ≥100,000 times
Working Cycle: 0.2s on, 2s off
NCE-K0727 Dual keep solenoids drawing:
